MIL-DTL-5038 Nylon Tape & Webbing

TMG has manufactured 5038-family tape and webbing. Send the Type, Class, dimensions and finish to review reinforcing tape options for your project.

Nylon webbing construction sample
Sample image from the TMG library. Exact article, dimensions and classification to be confirmed.

Technical reference

Technical revision: MIL-DTL-5038K · 2016-06-22

Validation notice: K Notice 2 · 2026-04-22

Legacy drawing references: MIL-T-5038 / MIL-PRF-5038

Official record reviewed: 2026-11-17. Open the DLA document record

Classification and construction

Class 1

Shuttle loom; nylon 6,6.

Class 1A

Shuttleless loom; nylon 6,6.

Class 2

Shuttle or shuttleless loom; nylon 6 or nylon 6,6.

Standard requirements, not TMG batch measurements or a stock list. Confirm the proposed article and its evidence before ordering.
MIL-DTL-5038K · section 1.2 · page 1
TypeConstructionRequirement review
IDeleted—
IIHerringbone twill tapeReview this requirement
IIIPlain-weave tapeReview this requirement
IVDouble-plain-weave webbingReview this requirement
VHerringbone twill tapeReview this requirement
VIHerringbone twill tapeReview this requirement
VIIPreshrunk plain-weave tapeReview this requirement

Selected values only; the full document, notes, inspection and color requirements still apply.

Breaking force is not a working load rating. Confirm suitability, seams and acceptance requirements with the equipment designer. A newer document or a similar width does not authorize a substitution.

MIL-DTL-5038 reinforcing tape: choose Type and weave

MIL-T-5038 and MIL-PRF-5038 appear on older drawings. Include the full designation and revision when requesting nylon reinforcing tape. Review any change to MIL-DTL-5038 with the purchaser instead of selecting by the number 5038 alone.

In the Revision K reference above, Type II, Type V and Type VI are herringbone twill tape; Type III is plain-weave tape; Type IV is double-plain-weave webbing; and Type VII is preshrunk plain-weave tape. Type I is deleted. Types sharing a weave still require their own dimensional and performance review.

For a reinforcing tape quotation, send width and thickness with tolerances, required Type and Class, quantity, color and finish. State whether the tape reinforces a seam, binds an edge or serves another function in your assembly. TMG reviews the proposed construction against that drawing; an application name alone does not establish suitability or compliance.

Manufacturing and supply enquiries

Comparing suppliers for MIL-DTL-5038? TMG has manufactured this specification family in Dongguan, China. Send your drawing and purchasing requirements for a review of construction, sample options and quotation. Confirm the exact article, test documents, minimum order and lead time with the proposal.

Sample constructions

Use the sample images to discuss construction and hand feel. Request a matched sample after the drawing, fiber, width, color and finish have been reviewed.

Nylon webbing construction sample
Nylon webbing construction sample 1
Nylon webbing construction sample
Nylon webbing construction sample 2
Nylon webbing construction sample
Nylon webbing construction sample 3
Nylon webbing construction sample
Nylon webbing construction sample 4
Nylon webbing construction sample
Nylon webbing construction sample 5

Build the order around your drawing

For each article, agree the physical construction, acceptance tests and documents before production.

  • Material and yarn, loom/edge construction, width, thickness and tolerances.
  • Color reference, pattern and finishing; NIR/IRR limits and conditioning where required.
  • Required test methods, sampling, acceptance limits and lot-to-roll traceability.
  • Quantity, sample approval, MOQ, production schedule, packaging and roll length.

Manufacturing origin

TMG manufactures in Dongguan, China. Technical performance and origin requirements are separate. China-made webbing is not offered as U.S.-origin Berry-compliant material.

Documents and selection guides

Questions before ordering

Can I order using the specification number alone?

Include the contracted revision and the applicable classification, dimensions, color, finish and acceptance requirements. TMG reviews the exact proposed article before confirming a quote.

Can you provide samples and test documents?

Request sample options and available reports for the selected article. Agree which tests, lot identification and documents the order requires before production.

What are the MOQ and lead time?

MOQ, sampling and production timing are quoted for the exact construction, color, finish and quantity. Confirm the start condition and schedule with your quotation.

Is MIL-DTL-5038 Type III plain-weave tape the same as Type IV webbing?

No. Revision K identifies Type III as plain-weave tape and Type IV as double-plain-weave webbing. Choose the article required by the drawing and review its full dimensions, Class and acceptance requirements before ordering.

Send the requirement you need quoted

Your specification and product page are included with the inquiry. Add the details you know; leave unresolved classification or dimensions for review.

MIL-DTL-5038

  • Material and yarn, loom/edge construction, width, thickness and tolerances.
  • Color reference, pattern and finishing; NIR/IRR limits and conditioning where required.
  • Required test methods, sampling, acceptance limits and lot-to-roll traceability.
  • Quantity, sample approval, MOQ, production schedule, packaging and roll length.