MIL-PRF-17337 Nylon Webbing

TMG has manufactured 17337-family nylon webbing. Send your contracted revision, Class, width and color so we can assess the construction and prepare a quote or sample proposal.

Nylon webbing construction sample
Sample image from the TMG library. Exact article, dimensions and classification to be confirmed.

Technical reference

Technical revision: MIL-PRF-17337G · 2017-02-14

Validation notice: G Notice 2 · 2026-09-23

Legacy drawing references: MIL-W-17337

Official record reviewed: 2026-11-17. Open the DLA document record

Classification and construction

Class 1

Lifesaving equipment; shuttle construction; nylon 6,6.

Class 2

Load-carrying equipment; shuttle or shuttleless construction; nylon 6 or nylon 6,6.

Standard requirements, not TMG batch measurements or a stock list. Confirm the proposed article and its evidence before ordering.
MIL-PRF-17337G · Table III · page 7
Width ± tolerance (in)Thickness (in)Maximum mass (oz/yd)Minimum breaking force (lbf)Requirement review
1 ± 1/160.038–0.0500.71,200Review this requirement
1-1/2 ± 1/160.038–0.0501.11,800Review this requirement
2 ± 1/160.038–0.0501.42,200Review this requirement
3 ± 1/160.038–0.0502.23,200Review this requirement
3-1/2 ± 1/160.038–0.0502.64,000Review this requirement

Selected values only; the full document, notes, inspection and color requirements still apply.

Breaking force is not a working load rating. Confirm suitability, seams and acceptance requirements with the equipment designer. A newer document or a similar width does not authorize a substitution.

MIL-PRF-17337 webbing: Class and width selection

For a MIL-W-17337 webbing enquiry, include the revision on your drawing and the required Class. The reference above distinguishes Class 1 and Class 2; width alone does not identify the loom, yarn or acceptance requirements.

A 1 inch nominal width is 25.4 mm; 1-1/2 inch is 38.1 mm and 2 inch is 50.8 mm. If your drawing calls for 25 mm, 38 mm or 50 mm webbing, state that exact metric dimension and tolerance. These rounded metric sizes are not automatically interchangeable with an inch-based requirement. The table above shows selected standard dimensions, not a list of stocked products.

For tactical or load-carrying equipment, include the assembly drawing, color reference and finish. Specify NIR/IRR targets and test conditions when required. Sample approval should cover dimensions and construction as well as appearance.

Manufacturing and supply enquiries

Comparing suppliers for MIL-PRF-17337? TMG has manufactured this specification family in Dongguan, China. Send your drawing and purchasing requirements for a review of construction, sample options and quotation. Confirm the exact article, test documents, minimum order and lead time with the proposal.

Sample constructions

Use the sample images to discuss construction and hand feel. Request a matched sample after the drawing, fiber, width, color and finish have been reviewed.

Build the order around your drawing

For each article, agree the physical construction, acceptance tests and documents before production.

  • Material and yarn, loom/edge construction, width, thickness and tolerances.
  • Color reference, pattern and finishing; NIR/IRR limits and conditioning where required.
  • Required test methods, sampling, acceptance limits and lot-to-roll traceability.
  • Quantity, sample approval, MOQ, production schedule, packaging and roll length.

Manufacturing origin

TMG manufactures in Dongguan, China. Technical performance and origin requirements are separate. China-made webbing is not offered as U.S.-origin Berry-compliant material.

Documents and selection guides

Questions before ordering

Can I order using the specification number alone?

Include the contracted revision and the applicable classification, dimensions, color, finish and acceptance requirements. TMG reviews the exact proposed article before confirming a quote.

Can you provide samples and test documents?

Request sample options and available reports for the selected article. Agree which tests, lot identification and documents the order requires before production.

What are the MOQ and lead time?

MOQ, sampling and production timing are quoted for the exact construction, color, finish and quantity. Confirm the start condition and schedule with your quotation.

Can I request 1 inch or 25 mm MIL-PRF-17337 nylon webbing?

Send the exact width, tolerance, Class and contracted revision. One inch equals 25.4 mm; a 25 mm drawing needs its own dimensional review. TMG confirms the proposed article and sample options before quoting.

Send the requirement you need quoted

Your specification and product page are included with the inquiry. Add the details you know; leave unresolved classification or dimensions for review.

MIL-PRF-17337

  • Material and yarn, loom/edge construction, width, thickness and tolerances.
  • Color reference, pattern and finishing; NIR/IRR limits and conditioning where required.
  • Required test methods, sampling, acceptance limits and lot-to-roll traceability.
  • Quantity, sample approval, MOQ, production schedule, packaging and roll length.