A-A-55301 Nylon Webbing
TMG has manufactured A-A-55301-family nylon webbing. Send the Type, width and construction requirements so we can assess the article and prepare a quotation.

Technical reference
Technical revision: A-A-55301A · 2016-05-19
Validation notice: A Notice 2 · 2026-04-21
Official record reviewed: 2026-11-17. Open the DLA document record
Classification and construction
| Type | Nominal width (in) | Requirement review |
|---|---|---|
| I | 2-1/4 | Review this requirement |
| II | 1-1/4 | Review this requirement |
| III | 1 | Review this requirement |
| IV | 3/4 | Review this requirement |
| V | 5/8 | Review this requirement |
| VI | 1-1/2 | Review this requirement |
Types I and III have alternate construction columns. The Type III non-alternate reference includes 1 ± 1/16 in width, 0.046 ± 0.007 in thickness, minimum mass 0.50 oz/yd and minimum breaking force 1,000 lbf (PIA-TM-4108). Do not mix standard and alternate columns.
Selected values only; the full document, notes, inspection and color requirements still apply.
Breaking force is not a working load rating. Confirm suitability, seams and acceptance requirements with the equipment designer. A newer document or a similar width does not authorize a substitution.
A-A-55301 webbing: Type III and other widths
A-A-55301 covers nylon webbing for equipment belts, rifle slings and load-carrying equipment. For a supplier review, identify the Type and whether the drawing requires standard or alternate construction. The Type name is not a factory SKU or proof of a tested batch.
The nominal Type III width is 1 inch (25.4 mm). Type II is 1-1/4 inch (31.75 mm), Type IV is 3/4 inch (19.05 mm), and Type VI is 1-1/2 inch (38.1 mm). Refer to the table for the other Types and use the full document for tolerances. A 25 mm or 38 mm enquiry must state its exact metric dimensions rather than assume an inch-based size is identical.
Types I and III have alternate construction columns. The Type III physical excerpt above is for the non-alternate construction. Keep the width, thickness, mass and breaking-force requirements within the correct column. For a belt or rifle-sling project, also share buckle or adjuster dimensions, finish and assembly requirements for sample review.
Manufacturing and supply enquiries
Comparing suppliers for A-A-55301? TMG has manufactured this specification family in Dongguan, China. Send your drawing and purchasing requirements for a review of construction, sample options and quotation. Confirm the exact article, test documents, minimum order and lead time with the proposal.
Sample constructions
Use the sample images to discuss construction and hand feel. Request a matched sample after the drawing, fiber, width, color and finish have been reviewed.
Build the order around your drawing
For each article, agree the physical construction, acceptance tests and documents before production.
- Material and yarn, loom/edge construction, width, thickness and tolerances.
- Color reference, pattern and finishing; NIR/IRR limits and conditioning where required.
- Required test methods, sampling, acceptance limits and lot-to-roll traceability.
- Quantity, sample approval, MOQ, production schedule, packaging and roll length.
Manufacturing origin
TMG manufactures in Dongguan, China. Technical performance and origin requirements are separate. China-made webbing is not offered as U.S.-origin Berry-compliant material.
Documents and selection guides
- Download the technical reference (.pdf)
Version 2026-11-17. Standard requirements and order checklist; not a batch test report.
- Official specification record
Check the full technical document, revision history and notices.
- Download the RFQ checklist (.txt)
A purchasing checklist for this specification. Fill in your drawing and acceptance requirements.
- Download the TMG catalog (.pdf)
Company and construction overview; confirm article-specific data for your order.
- MIL-W-17337 vs A-A-55301: Nylon Webbing Selection
Related selection guide
- Mil-Spec Webbing Standards: 17337, 4088 & A-A-55301
Related selection guide
- Choosing the Right Webbing for Gun Slings: A Manufacturer's Guide
Related selection guide
- How to Choose Webbing Width: Size Chart, Strength & Applications
Related selection guide
Questions before ordering
Can I order using the specification number alone?
Include the contracted revision and the applicable classification, dimensions, color, finish and acceptance requirements. TMG reviews the exact proposed article before confirming a quote.
Can you provide samples and test documents?
Request sample options and available reports for the selected article. Agree which tests, lot identification and documents the order requires before production.
What are the MOQ and lead time?
MOQ, sampling and production timing are quoted for the exact construction, color, finish and quantity. Confirm the start condition and schedule with your quotation.
Can A-A-55301 Type III replace MIL-W-17337 webbing of the same width?
Matching width does not authorize substitution. These are separate specification families with different construction and acceptance requirements. Send the equipment drawing and contracted document; obtain the required approval for any proposed replacement.
Send the requirement you need quoted
Your specification and product page are included with the inquiry. Add the details you know; leave unresolved classification or dimensions for review.
A-A-55301
- Material and yarn, loom/edge construction, width, thickness and tolerances.
- Color reference, pattern and finishing; NIR/IRR limits and conditioning where required.
- Required test methods, sampling, acceptance limits and lot-to-roll traceability.
- Quantity, sample approval, MOQ, production schedule, packaging and roll length.